article · Advanced Engineering Research (Rostov-on-Don) · 2021
Thick-walled spherical shell problem
A. M. Artemov, Evgenii S. Baranovskii, A. A. Verlin, E. V. Syomka
Cited by 3Open access
Abstract
Introduction. Cylindrical and spherical shells are extensively used in engineering. They face internal and/or external pressure and heat. Stresses and strains distribution in elastoplastic shells has been studied by many scientists. Numerous works involve the use of the von Mises yield conditions, maximum shear stress, maximum reduced stress. These condi- tions do not include the dependence on the first invariant of the stress tensor and the sign of the third invariant of the stress deviator. In some cases, it is possible to obtain numerical-analytical solutions for stresses, displacements and de- formations for bodies with spherical and cylindrical symmetry under axisymmetric thermal and force action. Materials and Methods. The problem on the state of a thick-walled elastoplastic shell is solved within the framework of the theory of small deformations. A plasticity condition is proposed, which takes into account the dependence of the stress tensor on three independent invariants, and also considers the sign of the third invariant of the stress deviator and translational hardening of the material. A disconnected thermoelastoplastic problem is being solved. To estimate the stresses in the region of the elastic state of a spherical shell, an equivalent stress is introduced, which is similar to the selected plasticity function. The construction of the stress vector hodograph is used as a method for verification of the stress state. Results. The problem has an analytical solution for linear plasticity functions. A solution is obtained when the strength- ening of the material is taken into account. Analytical and graphical relationships between the parameters of external action for the elastic or elastoplastic states of the sphere are determined. For a combined load, variants are possible when the plastic region is generated at the inner and outer boundaries of the sphere or between these boundaries. Discussion and Conclusions. The calculation results have shown that taking into account the plastic compressibility and the dependence of the plastic limit on temperature can have a significant impact on the stress and strain state of a hollow sphere. In this case, taking into account the first invariant of the stress tensor under the plasticity condition leads to the fact that not only the pressure drop between the outer and inner boundaries of the spherical shell, but the pressure values at these boundaries, can vary within a limited range. In this formulation of the problem, when there is only thermal action, the hollow sphere does not completely pass into the plastic state. The research results provide predicting the behavior of an object (a hollow sphere) that experiences centrally symmetric distributed power and thermal external influences.
Cite this paper
Artemov, A. M., Baranovskii, E. S., Verlin, A. A., & Syomka, E. V. (2021). Thick-walled spherical shell problem. Advanced Engineering Research (Rostov-on-Don), 21(1), 22–31. https://doi.org/10.23947/2687-1653-2021-21-1-22-31
Artemov, A. M., et al. “Thick-walled spherical shell problem.” Advanced Engineering Research (Rostov-on-Don), vol. 21, no. 1, 2021, pp. 22–31, https://doi.org/10.23947/2687-1653-2021-21-1-22-31.
Artemov, A. M., Evgenii S. Baranovskii, A. A. Verlin, and E. V. Syomka. 2021. “Thick-walled spherical shell problem.” Advanced Engineering Research (Rostov-on-Don) 21 (1): 22–31. https://doi.org/10.23947/2687-1653-2021-21-1-22-31.
Artemov, A.M. et al. (2021) ‘Thick-walled spherical shell problem’, Advanced Engineering Research (Rostov-on-Don), 21(1), pp. 22–31. Available at: https://doi.org/10.23947/2687-1653-2021-21-1-22-31.
@article{artemov2021thick,
title = {{Thick-walled spherical shell problem}},
author = {Artemov, A. M. and Baranovskii, Evgenii S. and Verlin, A. A. and Syomka, E. V.},
journal = {Advanced Engineering Research (Rostov-on-Don)},
volume = {21},
number = {1},
pages = {22--31},
year = {2021},
doi = {10.23947/2687-1653-2021-21-1-22-31}
}Made from the index record. Check names, capitalisation and page numbers against the paper. Need another style? AI for Research has over 10,000.