Search 250 million research papers

BOILING 4 (Flow Boiling)

Y. Y. Hsu · Proceeding of International Heat Transfer Conference 4 · 1970

Cited by 0

Boiling Springs (Boiling Springs)

WakeSpace Scholarship (Wake Forest University) · 2018

Ephemeral materials related to churches or associations that are associated with Baptist communities of North Carolina and surrounding areas, collected and arranged by Special Collections & Archives of Z. Smith Reynolds Library at Wake Forest University.

Cited by 0

Boiling: Introduction And Pool Boiling

P.B. Whalley · 1990

Abstract Boiling can be divided into categories according to the mechanism occurring, and according to the geometric situation. The three mechanisms of boiling are: (a) nucleate boiling, where vapour bubbles are formed (usually at a solid surface); (b) convective boiling, where the heat is conducted through a thin film of liquid-the liquid then evaporates at the vapour-liquid interface with no bubble formation; and (c) film boiling, where the heated surface is blanketed by a film of vapour-the heat is conducted through the vapour, and the liquid vaporizes at the vapour-liquid interface.

Cited by 0

boiling

2023

Cited by 0

BOILING

Proceeding of International Heat Transfer Conference 4 · 1970

Cited by 0

Boiling

Physics Subject Headings (PhySH) · 2024

Cited by 0

BOILING

R.HS Winterton · A-to-Z Guide to Thermodynamics Heat and Mass Transfer and Fluids Engineering · 2006

Cited by 0

Boiling

Amir Faghri, Yuwen Zhang · 2019

Cited by 1

Boiling

Mohajer va Pesaran, Daphne · The British Museum · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat. This image clearly shows how the boiling process softens the fibers and they are easy to pull apart by hand

Cited by 0Open access

Boiling

Mohajer va Pesaran, Daphne · The British Museum · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat.

Cited by 0Open access

Boiling

Mohajer va Pesaran, Daphne · Figshare · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat. This image clearly shows how the boiling process softens the fibers and they are easy to pull apart by hand

Cited by 0Open access

Boiling

1973

NUMBER OF PAGES: (viii), 90 SCOPE AND CONTENTS: An experimental investigation is reported for water. boiling at atmospheric pressure on a copper surface. Bubble nucleation at an artificial site was observed for 2five heat fluxes between 11,000 and 20,000 BTU/Hr Ft,

Cited by 0

Boiling

Mohajer va Pesaran, Daphne · The British Museum · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat.

Cited by 0Open access

Boiling

Mohajer va Pesaran, Daphne · The British Museum · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat.

Cited by 0Open access

Boiling

Mohajer va Pesaran, Daphne · Figshare · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat.

Cited by 0Open access

Boiling

Christian Isobel Johnstone · Cambridge University Press eBooks · 2013

A summary is not available for this content so a preview has been provided. Please use the Get access link above for information on how to access this content.

Cited by 0

Boiling

Mohajer va Pesaran, Daphne · Figshare · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat.

Cited by 0Open access

Boiling

Mohajer va Pesaran, Daphne · Figshare · 2025

After washing, the water is strained out as best as possible, and the strips are put into a large pot with ash from the hearth or soda ash and boiled hard for 2 or 3 hours. The material is left in the pot to steam overnight with the remaining heat.

Cited by 0Open access

Boiling.

James Liburdy · 2009

It is hypothesized that extracting the vapor from two-phase flow in a microchannel will result in a lowered pressure drop required to drive the flow. The goal of this thesis is to construct an experimental device that will test this hypothesis by comparing a number of phase separating test conditions to respective control conditions that do not allow for any phase separation. It was discovered that using a transparent, thin-film heater to boil flow in a microchannel required too much power; the heater designed and built for this purpose was burnt out during testing. Possible reasons for the burnout are discussed. The original test plan was modified to boil the flow prior to the microchannel. The trends found from the new test plan supported the hypothesis. Vapor extraction was related to decreases in the pressure drops; however, vapor extraction rates were measured well below their predicted values. Reasons for the discrepancies are discussed. In conclusion, it was found that vapor extraction does decrease microchannel

Cited by 0

boiling

J. L. Munoz-cobo, A. Escrivá, M. D. Domingo · 2016

Cited by 0