American Water Works Association · 1978
Approximately 76 percent of the states now provide some program of operator training for water utility employees, but only about 30 percent of the states have legislated any required training program. The biggest problem is that no standards or uniformity exist for the training of water utility operators. This in turn creates problems with certification and the reciprocity of that certification from state to state. The components of an effective training program are discussed.
Cited by 0
Steven E. Hampson · Birkhäuser Boston eBooks · 1990
Training multilevel networks to detect arbitrary Boolean functions from input/output pairs has been a long standing problem. Considerable progress has been made, but current connectionistic learning algorithms (e.g., Hinton et al., 1984; Ackley et al., 1985; Barto, 1985; Rumelhart et al., 1986) are of limited physiological relevance, and empirically are quite slow. The approaches developed here are somewhat more physiologically plausible and considerably faster.
Cited by 0
Bridget A. Fitzpatrick · 2026
Cited by 0Open access
Hanford Engineering Development Lab., Richland, WA (USA) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1979
The qualifications required and the training received by FFTF operators are described. The training includes sodium fill training and cold plant qualification. Requirements for supervisors are also outlined. Arrangement of personnel at FFTF is described. Requalification training and recertification are considered. (DLC)
Cited by 0Open access
A Stawarz · Computers & Chemical Engineering · 1995
Cited by 1
Defense Technical Information Center (DTIC) · 1967
The document provides the methods and techniques for operator training and familiarization associated with experimental items undergoing Engineering tests.
Cited by 0
South Carolina Criminal Justice Academy · The South Carolina State Library Digital Collections (South Carolina State Library) · 2014
The South Carolina Criminal Justice Academy publishes information about each of their class, including class limit, course location, course description, who should attend, and number of CLEE credits.
Cited by 0Open access
Yiannis Bessiris, Dionyssia Kyriakopoulou, Fadi Ghajar et al. · Computer-aided chemical engineering/Computer aided chemical engineering · 2011
Cited by 10
National Cancer Institute · Definitions · 2020
Ope n Pe e r Re v ie w on Qe ios
Cited by 0Open access
Duffy, Daniel, 1951- · State Elections Enforcement Commission (State of Connecticut)
Electronic data.; Title from title screen.; "February 9, 2004."; Summarizes law concerning food operator training. State statute requires the Dept. of Public Health to adopt regulations requiring at least one person in a restaurant be trained in food safety.; Harvested from the web on 4/12/04
Cited by 0
Im Rahmen Der Konferenz Modellierung, Andreas Harrer, Alke Martens (herausgeber et al. · 2008
Cited by 0
Philip J., Frank David Todd, Philip J., Frank David Todd et al. · The institutional digital repository of Naif Arab University for Security Sciences (Naif Arab University for Security Sciences) · 2022
Operator training simulators in the process industry have been around since the 1970s, but you may not find a book that documents the development of these systems and the standard best practices. The Operator Training Simulator Handbook covers best practices for OTS engineering and OTS training development and delivery, starting from the basic the jargon and the different types of OTS systems. It will take you through the best approaches to project specification as well as building, maintenance, planning, and delivering these systems by sharing real-life experiences and dos and Пропустить")' class='error'>don'ts. As you advance, you'll uncover the various challenges in the planning and delivery of operator training models and understand how to address those by working through real-world projects. This book helps in specifying the best fit for purpose, choosing a cost-effective system when acquiring an OTS. You'll also learn how you can turn your OTS projects into digital twins before finally learning all abou
Cited by 0
Miguel Encarnação, Carlos Alexandre, Flávio Jorge · 2008
perator-training programs for nuclear power plants (NPPs) must take into ac-count high safety requirements. These programs must effi ciently train workers to manage both normal and abnormal operational conditions and to respond correctly to abnormal conditions through established procedures. The “Nuclear Power Plant Operation” sidebar provides an over-view of NPPs and their operational challenges.In the past, operator training employed physical copies of NPP control desks, with the same layout as real ones. Because these copies were large and expensive, computer-based NPP simulation has be-come an alternative. This simulation has two parts. The fi rst is a numerical model that mimics all NPP subsystems (for example, the reactor core and the instrumentation and control systems), their in-terdependencies, and their infl uence on the NPP’s overall performance.The second part is an interface that presents all important information for the trainees through synoptic windows—multiple computer displays rep-resenting a simplifi ed control desk. Unfortunately, the synoptic windows don’t resemble the original control desks. During training, operators must navigate through many synoptic windows, which makes properly following operational procedures diffi cult, especially during simulated incidents or accidents.We’ve helped develop an approach that avoids the challenges of constructing physical copies of control desks and navigating through synoptic windows. It replaces the synoptic windows with a virtual control desk that precisely mimics the original.
Cited by 0
Daniel Markley · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 1991
D0 is a collider detector. It will be operating and doing physics at the same time as CDP, therefore it has been decided to train CDP operators to operate and respond to the D0 cryogenic control system. A cryogenic operator will be required to be in residence at D0, during the cooldown and liquid Argon fill of any of the calorimeters. The cryogenic system at D0 is designed to be unmanned during steady state operation. CDP operations has 2 man cryogenic shifts 24 hours a day. It is intended that CDP operators monitor the D0 cryogenic systems, evaluate and respond to alarms, and notify a D0 cryo expert in the event of an unusual problem. A D0 cryogenic system view node has been installed at CDP to help facilitate these goals. It should be noted that even though the CDP view node is a fully operational node it is intended that it be more of an information node and is therefore password protected. The D0 cryo experts may reassess the use of the CDP node at a later date based on experience and operating needs. This engineering note outlines the format of the training and testing given to the CDP operators to make them qualified D0 operators.
Cited by 0Open access
P.G. van Schaick Zillesen, Rik Min, M.R. Gmelich meijling et al. · 1995
Cited by 0
M. Prais, Cheryl I. Johnson, Anjan Bose et al. · IEEE Power Engineering Review · 1989
The power system simulation in an operator training simulator (OTS) is made up of a periodic solution of the steady state power network synchronized with a solution of the slow dynamic behavior due to the power balance of the system. The periodicity of the static solution (henceforth, called the OTS cycle time) has to coincide with the data scan rate of a control center so that changes in the variables of the simulated system accurately mimics the actual measurement data acquisition system. Thus, if the computation time for one static solution and the dynamic solution for the cycle time, can be kept to less than or equal to the cycle time itself, then effective real time simulation is achieved. Obviously, a matching of the computer size to power system size is needed to ensure this real time simulation, assuming, of course, that the fastest available solution algorithms are used. The design of such a computationally demanding application as the OTS requires many considerations almost all of which distill down to a compromise between accuracy and computation. Thus, the models used to represent the various components of the power system have to be carefully chosen to provide adequate accuracy with the highest computational efficiency. Such models have been developed and refined over the years for such applications as power flow and transient stability. However, the requirements of an OTS are sufficiently different from these other applications that many of these existing models were not found to be directly usable without change.
Cited by 24
David Cameron, C. Clausen, W.T. Morton · Computer-aided chemical engineering/Computer aided chemical engineering · 2002
Cited by 16
Namkyeong Cho, Junseung Ryu, Hyung Ju Hwang · SSRN Electronic Journal · 2024
Cited by 0Open access
elkin · 2014
Cited by 0
South Carolina Department of Labor, Division of Occupational Safety and Health · The South Carolina State Library Digital Collections (South Carolina State Library) · 1970
This booklet has been prepared to assist employers in their efforts to comply with the South Carolina Occupational Safety \nand Health Act to provide for training of employees in the recognition, avoidance and prevention of unsafe or unhealthful working conditions. The objective of this booklet is to make the operators of powered industrial trucks aware of their responsibility in the safe use of the equipment. The operator should already know how to operate the equipment. This training is to be used as a re-enforcement to safe operating procedure.
Cited by 0Open access